Predisposizione elettroniche su rack
Predisposizione elettroniche su rack
Salve, ho il rack composto da PS1020, Philips CD960LT, V7500, T7500 con tutte le elettroniche connesse tra di loro.
Prossimamente dovrò inserire anche un Pioneer N30 AE , non avendo un ripiano è il caso di togliere il T7500 oppure spostarlo per fare spazio al Pioneer ed inserirlo sullo stesso ripiano sotto al V7500 ?
La domanda è posta anche per altri amplificatori Grundig eccetto il V1700 che non ho.
Ecco l'immagine del rack
Prossimamente dovrò inserire anche un Pioneer N30 AE , non avendo un ripiano è il caso di togliere il T7500 oppure spostarlo per fare spazio al Pioneer ed inserirlo sullo stesso ripiano sotto al V7500 ?
La domanda è posta anche per altri amplificatori Grundig eccetto il V1700 che non ho.
Ecco l'immagine del rack
Re: Predisposizione elettroniche su rack
Salve, se non sbaglio dopo gli ultimi sviluppi il sinto non arreca benefici agli integrati,ma solo al pre XV7500,il quale deve essere acceso dal T7500. L'unico integrato che si giova del miglioramento del sinto è il V1700 col suo T1700.conseguentemente se non ascolta la radio,può fare a meno del T7500 per fare posto all' N30.
cordialità.
Angelo Corbascio
cordialità.
Angelo Corbascio
Re: Predisposizione elettroniche su rack
Il sintonizzatore secondo me si sente comunque, anche non collegato e spento, bisognerebbe fare delle prove per capire ad orecchio la configurazione migliore. Difficile predire la configurazione migliore, dipende da tante cose.....
- Gianfranco
- Messaggi: 1575
- Iscritto il: ven 16 feb 2018, 15:10
- Località: Realtà a bassa intensità
Re: Predisposizione elettroniche su rack
Io metterei l'amplificatore sul ripiano più basso...
Gianfranco
- M.Ambrosini
- Site Admin
- Messaggi: 3604
- Iscritto il: ven 9 feb 2018, 7:10
- Località: Ravenna
- Contatta:
Re: Predisposizione elettroniche su rack
La miglior soluzione è quella di aggiungere un XV7500 al tuner ed usare l'integrato V7500 come finale lasciando il potenziometro di volume quasi al massimo e regolando il volume dal pre. Giusto anche disporre l'ampli sul ripiano più in basso per aver maggiore facilità di gestione dei cavi. Il Pioneer (se mod.LT) non vuole nulla sopra al pari del cd960 LT.
Fossi in te metterei pre e tuner sotto al Pioneer, cd 960 nel ripiano di mezzo e V7500 sul ripiano sotto.
I ripiani devono essere fissati al mobile e non solo in appoggio (a scanso di equivoci)
Fossi in te metterei pre e tuner sotto al Pioneer, cd 960 nel ripiano di mezzo e V7500 sul ripiano sotto.
I ripiani devono essere fissati al mobile e non solo in appoggio (a scanso di equivoci)
Massimo A.
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
Re: Predisposizione elettroniche su rack
What’s the right way of fixing shelves? My shelves are very heavy wooden plinths resting on small gel pads, glued to a metal construct. Does anything need to be changed here?M.Ambrosini ha scritto: ↑dom 1 ott 2023, 7:15I ripiani devono essere fissati al mobile e non solo in appoggio (a scanso di equivoci)
Boris
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
Re: Predisposizione elettroniche su rack
Is this combination equivalent to that of an XV7500+R7500 (or R7150), for which, per my understanding, the tuner would not be needed?M.Ambrosini ha scritto: ↑dom 1 ott 2023, 7:15La miglior soluzione è quella di aggiungere un XV7500 al tuner ed usare l'integrato V7500 come finale lasciando il potenziometro di volume quasi al massimo e regolando il volume dal pre.
Boris
Re: Predisposizione elettroniche su rack
Grazie a tutti di aver risposto alla mia richiesta.
Anche a me veniva il dubbio di inserire il Tuner nella catena, ma se funziona bene l'Rpc e la serie R ho ritenuto opportuno di inserirlo.
Dall'ultimo post di Massimo sembra meglio inserirlo se collegato all XV7500, quindi andrebbe escluso.
Massimo, ho assemblato di nuovo tutto , peccato di non avere l'xv7500 di colore nero.
Il Pioneer in arrivo è anche nero.
Adesso il problema è cercare la fase giusta di tutte le elettroniche, da quale inizio per non sbagliare?
Grazie
Allego foto
Anche a me veniva il dubbio di inserire il Tuner nella catena, ma se funziona bene l'Rpc e la serie R ho ritenuto opportuno di inserirlo.
Dall'ultimo post di Massimo sembra meglio inserirlo se collegato all XV7500, quindi andrebbe escluso.
Massimo, ho assemblato di nuovo tutto , peccato di non avere l'xv7500 di colore nero.
Il Pioneer in arrivo è anche nero.
Adesso il problema è cercare la fase giusta di tutte le elettroniche, da quale inizio per non sbagliare?
Grazie
Allego foto
- M.Ambrosini
- Site Admin
- Messaggi: 3604
- Iscritto il: ven 9 feb 2018, 7:10
- Località: Ravenna
- Contatta:
Re: Predisposizione elettroniche su rack
R7500 is equivalent (sound quality) solution of XV7500+T7500+V7500. But R7500 is available only silver versionsaharadust ha scritto: ↑dom 1 ott 2023, 9:57Is this combination equivalent to that of an XV7500+R7500 (or R7150), for which, per my understanding, the tuner would not be needed?M.Ambrosini ha scritto: ↑dom 1 ott 2023, 7:15La miglior soluzione è quella di aggiungere un XV7500 al tuner ed usare l'integrato V7500 come finale lasciando il potenziometro di volume quasi al massimo e regolando il volume dal pre.
Massimo A.
Re: Predisposizione elettroniche su rack
Questa soluzione è valida anche per il V7000 e altri ampli Grundig?
- M.Ambrosini
- Site Admin
- Messaggi: 3604
- Iscritto il: ven 9 feb 2018, 7:10
- Località: Ravenna
- Contatta:
Re: Predisposizione elettroniche su rack
si, solo gli ampli ad eccezione del 1700 che ha il suo tuner dedicato.
Massimo A.
Re: Predisposizione elettroniche su rack
Con il pre inserito sembra avere un suono simile all'RPC
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
Re: Predisposizione elettroniche su rack
Thank you.M.Ambrosini ha scritto: ↑dom 1 ott 2023, 14:23R7500 is equivalent (sound quality) solution of XV7500+T7500+V7500. But R7500 is available only silver version
Sorry to repeat the question below, but just wanted to make sure you’ve not missed the earlier of the two posts I made.
What’s the right way of fixing shelves? My shelves are very heavy wooden plinths resting on small gel pads, glued to a metal construct. Does anything need to be changed here?saharadust ha scritto: ↑dom 1 ott 2023, 9:55[quote=M.Ambrosini post_id=20443 time=<a href="tel:1696137313">1696137313</a> user_id=48]
I ripiani devono essere fissati al mobile e non solo in appoggio (a scanso di equivoci)
Boris
- M.Ambrosini
- Site Admin
- Messaggi: 3604
- Iscritto il: ven 9 feb 2018, 7:10
- Località: Ravenna
- Contatta:
Re: Predisposizione elettroniche su rack
Can you post a photo? Gel feet may not be a good solution...saharadust ha scritto: ↑lun 2 ott 2023, 6:27
What’s the right way of fixing shelves? My shelves are very heavy wooden plinths resting on small gel pads, glued to a metal construct. Does anything need to be changed here?
Massimo A.
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
Re: Predisposizione elettroniche su rack
I will when I’m back home next week.M.Ambrosini ha scritto: ↑mer 4 ott 2023, 17:35Can you post a photo? Gel feet may not be a good solution...saharadust ha scritto: ↑lun 2 ott 2023, 6:27
What’s the right way of fixing shelves? My shelves are very heavy wooden plinths resting on small gel pads, glued to a metal construct. Does anything need to be changed here?
Boris
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
Re: Predisposizione elettroniche su rack
So, here come some pictures (I can't attach more than 1 to a single post - sorry about that). You will see the (fragment of the) rack, some detail as to how the wood is placed on the rack, how the gel feet are placed, and, finally, the feet on which the rack rests on the floor (showing also the TLX stand fixed to the floor with the blu tack).M.Ambrosini ha scritto: ↑mer 4 ott 2023, 17:35Can you post a photo? Gel feet may not be a good solution...saharadust ha scritto: ↑lun 2 ott 2023, 6:27
What’s the right way of fixing shelves? My shelves are very heavy wooden plinths resting on small gel pads, glued to a metal construct. Does anything need to be changed here?
I think it's an interesting topic that can be useful for many.
Boris
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
- M.Ambrosini
- Site Admin
- Messaggi: 3604
- Iscritto il: ven 9 feb 2018, 7:10
- Località: Ravenna
- Contatta:
Re: Predisposizione elettroniche su rack
It would be better to avoid dampening elements under the shelves but to glue them to the supporting frame. Possibly it would also be better to avoid using furniture with an iron frame (or metal in general) for use with full CCI elements. Better is a simple piece of furniture made entirely of wood, sturdy and not for "hifi use"
Massimo A.
- saharadust
- Messaggi: 64
- Iscritto il: sab 30 ott 2021, 20:50
Re: Predisposizione elettroniche su rack
Thank you, just to be clear, you're saying glue the shelves to the metal frame? ( I forgot to say that those gel feet are sticky on the bottom so, in effect, are glued to the frame (although easily removable)).M.Ambrosini ha scritto: ↑mer 11 ott 2023, 17:42It would be better to avoid dampening elements under the shelves but to glue them to the supporting frame.
Just a thought - would it be better if I removed the gel feet and "glued" the wooden shelves to the metal frame using blu tack?
Dang. The rack I have is pretty expensive (it was made specifically for me), perhaps more expensive than all or almost all my Grundigs combined. I've got to think as to for how much I can sell it.... and what would a new wooden one cost.Possibly it would also be better to avoid using furniture with an iron frame (or metal in general) for use with full CCI elements. Better is a simple piece of furniture made entirely of wood, sturdy and not for "hifi use"
Boris
- M.Ambrosini
- Site Admin
- Messaggi: 3604
- Iscritto il: ven 9 feb 2018, 7:10
- Località: Ravenna
- Contatta:
Re: Predisposizione elettroniche su rack
Trysaharadust ha scritto: ↑mer 11 ott 2023, 18:03
Just a thought - would it be better if I removed the gel feet and "glued" the wooden shelves to the metal frame using blu tack?
Massimo A.