HiFi Emozioni all'Ascolto - Audio Forum

M.Ambrosini ha scritto: ↑

mar 4 giu 2019, 20:25

Beh direi che sei autosufficiente

Filippo ha scritto: ↑

lun 22 apr 2019, 13:12

BUZZ78 ha scritto: ↑

lun 22 apr 2019, 11:03

Hello, I have the same feeling with the sl1000, the tweeter is well integrated with the medium but the listening shows a lake of aeration and this point is important if you want to reproduce the acoustic of the concert,especially the natural reverberation of room where the record is made. In the other and I have a old 7550 and may be it could explain this feeling...

it may be that the SL1000 have some limitations. but it also depends on many factors upstream, cables, amplifier, CDP, installation .......
I would choose cables carefully, if they are all not original Grundig.

BUZZ78 ha scritto: ↑

ven 7 giu 2019, 7:50

Hello friends,

I tried to use Grundig’s cables (from a 306 compact) instead my current schwaiger 3210. Grundig cable give a sound a little bit more transparent but sweet, with less rhythm and relief, I’m disappointing by the results. Are you surprised ? May be the problem is outside ? Configuration : cd7550, lt amplifier, sl1000.
Thanks in advance for your advices ...

M.Ambrosini ha scritto: ↑

ven 7 giu 2019, 7:53

BUZZ78 ha scritto: ↑

ven 7 giu 2019, 7:50

Hello friends,

I tried to use Grundig’s cables (from a 306 compact) instead my current schwaiger 3210. Grundig cable give a sound a little bit more transparent but sweet, with less rhythm and relief, I’m disappointing by the results. Are you surprised ? May be the problem is outside ? Configuration : cd7550, lt amplifier, sl1000.
Thanks in advance for your advices ...

Grundig cable have the point-line connectors to both sides?

BUZZ78 ha scritto: ↑

ven 7 giu 2019, 8:56

Hi Massimo, I have cut the original 306 cable, removed the male din connectors and add a female one for the sl1000

M.Ambrosini ha scritto: ↑

ven 7 giu 2019, 14:05

BUZZ78 ha scritto: ↑

ven 7 giu 2019, 8:56

Hi Massimo, I have cut the original 306 cable, removed the male din connectors and add a female one for the sl1000

Glue shell of female connector to cable.
And after, when the glue is dry, check the correct insertion direction of the 220V plug of amplifier.

BUZZ78 ha scritto: ↑

ven 7 giu 2019, 17:16

When you mentioned "glue shell of connector to cable" do you mean glue both parts of the speaker "plug in" (DIN connector) together, or just the shell of the connector to the cable ? thanks